What is a standard size soaking tub

Standard tubs usually have external measurements around 60 inches long, 30 inches wide and 14 to 16 inches high. When shopping for a soaking tub, find a tub that measures between 60 inches long and 72 inches long. Persons over six feet tall may want to consider an oversized bathtub for the most comfort.

What is the typical size of a soaker tub?

What sizes do typical soaking tubs come in? Typical soaking tubs range in length from 60 to 72 inches. It’s common for the average soaking tub to hold around 250 gallons of water.

How much room do you need for a soaker tub?

The Magic Number: 6 Inches As a rule of thumb, the minimum end-to-end (length) additional space you’ll need for a clawfoot, pedestal, or freestanding tub is 6 inches. Any less and the tub will look cramped in the space.

What is the difference between a soaker tub and a regular tub?

Soaking tubs average 23 inches in height, while a standard tub typically comes in at under 19 inches. … When it comes to size, soaking tubs blow regular tubs out of the water, with some topping out at 90 inches in length and 76 inches in width—big enough to accommodate two bathers.

How big is a freestanding soaking tub?

DimensionAverageRangeLength67 inches35-80 inchesWidth32 inches20-59 inchesSoaking Depth15 inches14-25 inches

👉 For more insights, check out this resource.

What is considered a deep soaking tub?

A deep soaking bathtub is a compact bath that is shorter but deeper than conventional baths. Essentially, it relies on depth rather than length for its capacity and comfort. … A 3D model of the Yasahiro deep soaking tub, showing the in-built seat, armrests and head-rest.

Is a 60 inch tub really 60 inches?

In general, standard dimensions will give you a rough figure for the size of the bathtub. However, they all vary depending on the shape and type of bathtub you are looking to purchase. For a typical standard, wall-wall bathtub, the measures will be roughly 60 inches long, 30-32 inches wide.

👉 Discover more in this in-depth guide.

How do you know what size bathtub to buy?

Generally, if your home can support it and you have the space for it, a larger tub is recommended. In the case of freestanding and corner bathtubs, if you have the requisite space, then by all means, choose those styles. But, if your space is more limited, alcove, drop-in, and soaking might be more suitable for you.

Can you replace a regular tub with a soaking tub?

How Small Can You Go? According to the National Kitchen & Bath Association, a standard bathtub is a minimum of 60 inches long and 30 to 32 inches wide. … Unfortunately, any tub less than 32 inches is usually very shallow as well, making it unsuitable for a deep and relaxing soak.

What is the most comfortable bath shape?

Oval bathtubs The most comfortable bath shape is oval since it has the right bathtub lumbar angle and features rounded ends for comfort. Oval tubs also look very beautiful since they combine the best bits of round and rectangular tubs.

Article first time published on

How far should tub be from freestanding tub?

Tub Height – most tubs are between 22″ – 28″ tall. The water exit point of the spout of the tub filler should be about 6 inches above the tub.

How deep is a standard bathtub?

The standard tub size for an alcove fixture is 60 inches long, 32 inches wide, and 18 inches deep. Small alcove tubs are available for smaller bathrooms, which are anywhere from 48 to 55 inches in length.

What size freestanding tub is best?

While the most common freestanding tub models are usually 4.5 ft. to 6 ft. long, we think the 60” long freestanding tub size is the most universally appealing to American homeowners.

How much space do you need for a freestanding bath?

A freestanding bath should have no less than 6 inches of space surrounding all angles of the tub. By following that guideline, you can ensure your freestanding bath has a comfortable access point, and won’t appear cramped in your bathroom regardless of its design.

What should I look for in a soaking tub?

A standard soaking tub simply gets filled with water, while a whirlpool or air bath has jets or channels that provide massaging air. Extras in a soaking bathtub are typically limited to arm- or headrests, grab bars, and slip-resistant flooring.

Can you put a freestanding tub in a small bathroom?

You can find these as small as 41 inches wide, which is perfect for a small bathroom. They also are available as oval or round freestanding tubs in various finishes, such as stainless steel, copper, or the traditional wood. Another way to fit a tub into a small bathroom is to consider installing a corner bathtub.

Are there tubs smaller than 60 inches?

A small bathtub typically measures less than 60 inches, but can still deliver plenty of room for sudsy fun or soothing soak sessions. … Lightweight and easy to clean, this 54 inch model is an affordable tub when you have tight budget and space requirements.

How much is a standard bathtub?

A standard bathtub/shower combination averages $300 to $2,000 for materials. For a freestanding tub, material costs range from $600 to $20,000, depending on the material the tub is made from.

How big is a 2 person bathtub?

Common freestanding bathtub sizes for 2 people A medium sized two person bathtub starts at around 66.9 inches long with a width of 33.5 inches and a height of 22 inches. The largest of the medium sized bathtubs comes in at 70 inches with a width of 35.4 inches and a height of 22.5 inches.

How is soaking depth measured?

To find the soaking depth of a tub, measure the inside wall of a bathtub from the base to the overflow drain at its deepest point. The most common bathtub soaking depth is 14″ – 17″. Once you’ve calculated your desired basin size, consider the volume of water it will take to fill.

What is a Japanese soaker tub?

The Japanese soaking tub—or “ofuro”—isn’t a new idea. … These Japanese soaking tubs have built-in seats and are much deeper than a regular American-style tub—about 27 inches deep, so that you sit upright and the water comes up to your chin, making it a true deep soaking tub.

How big is a Japanese soaking tub?

Japanese soaking tub dimensions vary from model to model, but they are typically at least 27” deep to allow bathers to immerse completely while seated. The tubs – which are usually square or round, occasionally rectangular or oval – are typically no more than 4.5′ in diameter; most are smaller.

Can a soaking tub be a shower?

They were small bathtubs that were really more intended to be used as showers. But, if you had small children –they look like they were a great size for bathing them when they were small. Then, as they grew, they could transition to using the space as a shower.

What is the deepest alcove soaking tub available?

On the other hand, alcove soaking tubs can vary on their depth and size, but will generally have a depth of 19-20 inches with 14 or more inches of soaking depth.

How do I get a deep tub?

1. Make Use of a Better Bath Deep Water Bath.
2. Sugru Moldable Glue Can be Used to Plug the Overflow Drain Hole.
3. Install a Drain Cover Plate on the Overflow Drain.
4. Cover the Overflow Drain Hole with a Caulk Strip.
5. Get a New Bathtub.
6. What happens to the tub overflow?

Can I replace a 30 inch tub with 32?

The bigger issue is when the width of the new tub exceeds the old space. Replacing a 30-inch tub with a 32-inch tub is an example. If the floor is concrete, this makes adjusting the flooring more difficult.

Are Square baths comfortable?

Its steeper sides allow you to sit up like a boat bath, but with the added comfort of extra room in the sides. A square bath like Drummonds Liffey is a good option if you like a spacious bath with plenty of room to relax.

Are Clearwater baths any good?

Clearwater is quite possibly our favourite brand when it comes to freestanding baths. … Clearwater use luxury materials including natural stones as well as more conventional acrylics, with the end result being a large number of baths that work perfectly as a standalone statement-piece in your new bathroom.

What are the best quality baths made of?

Nowadays, with the inclusion of quality acrylic material such as Lucite, fibreglass encapsulation, and resin reinforcement options such as ArmourCast, acrylic is the most popular material for baths, and for good reason.

Can a kitchen faucet be used for a bathtub?

And keep in mind that the tub faucet has a larger flow rate than other household faucets, which means you can’t use a kitchen faucet or your tub. Bathtub faucets should have a 3/4-inch supply line, as opposed to 1/2-inch for the rest of the house.

How do I stop my freestanding tub from moving?

Carefully set the tub in position and adjust the tub feet as necessary until level. Once level, apply a generous bead of silicone on the bottom of the feet. This will prevent the tub from shifting after installation.